双钳口自动对准平行i气动钳夹 (PE系列)
? 双动作(PE-25和PE-45可按要求单动作)。
? 高i性能，高可靠性。
? 不同行程的多种选择。
? 在整个行程中，夹紧力是不变的。
? 合金结构实现它的轻重量。
? FDA-H1 食品级润滑脂。
2-jaw parallel self-centering pneumatic gripper
(series PE)
? Double acting (single acting upon request for PE-25...
and PE-45...).
? High efficiency and reliability due to the lack of driving parts.
? Wide choice of stroke length options.
? The gripping force is constant on both directions along total
stroke.
? Light weight; due to its alloy construction.
? FDA-H1 food-grade grease.
编程单个SB8F
在对传感器盒进行编程之前，德州快速切换器，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，夹具快速切换器，直到READING红灯开始闪烁，机器人夹具快速切换器，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，电动快速切换器，启用了输出。黄灯（STORED）指示启用输出。
Before programming the sensor box， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for 3 seconds until the READING red light starts fashing， then release it.The red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).
双钳口自动对准平行i气动钳夹 (SX系列)
?双动作 (可按需关闭)。
?高夹紧力。
?防护等级为IP67。
?列柱向上采用双层O型圈设计。
?适用于恶劣的环境。
?可选的磁传感器。
?FDA-H1 食品级润滑脂
?Double acting (normally closed on request).
?High gripping force.
?Protection class: IP67.
?Double O-Ring sealing on the columns.
?Suitable for harsh environments.
?Optional magnetic sensors.
?FDA-H1 food-grade grease.
夹具快速切换器-德州快速切换器-吉玛泰克自动化(查看)由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司拥有很好的服务与产品，不断地受到新老用户及业内人士的肯定和信任。我们公司是商盟认证会员，点击页面的商盟客服图标，可以直接与我们客服人员对话，愿我们今后的合作愉快！