真空海绵吸具-海绵吸具-吉玛泰克

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，海绵吸具价格，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，海绵吸具，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould，海绵吸具报价， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould， the gripper is

pressurized，真空海绵吸具， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

迷你符合性设备，适用于小抓持器

? X-Y 及 α 角符合性[1]。

? 在方向 Z 为刚性。

? 一根空气导管连接至中央零位 [2]。

? 另一根空气导管可锁定任何偏移位置 [3]。

Mini compliance device， for small grippers

? X-Y and angle α compliance [1].

? Rigid in Z direction.

? One air lead to get the central zero psition [2].

? Another air lead to lock in any offset psition [3].

双钳口自动校准平行i气动钳夹(SZ系列)

?双作用。

?弹簧关闭；如需要时弹簧打开 。

?多种的紧固和输送选项。

?可选的磁传感器。

?FDA-H1 食品级润滑脂。

?不锈钢颚式钳。

?Double acting.

?Available with normally closed or normally open spring on

request.

?Various options for fastening and feeding.

?Optional magnetic sensors.

?FDA-H1 food-grade grease.

?Stainless steel jaws.